Add to Cart
PTFE Thrust Washer With Steel Backed INA
Description | ID | OD | T |
PAW 12 P10 | 12 | 24 | 1,5 |
PAW 42 P10 | 42 | 66 | 2,0 |
PAW 48 P10 | 48 | 74 | 1,5 |
PAW 14 P10 | 14 | 26 | 1,5 |
PAW 28 P10 | 28 | 48 | 1,5 |
PAW 26 P10 | 26 | 44 | 1,5 |
PAW 20 P10 | 20 | 36 | 1,5 |
PAW 22 P10 | 22 | 38 | 1,5 |
PAW 38 P10 | 38 | 62 | 1,5 |
PAW 18 P10 | 18 | 32 | 1,5 |
PAW 32 P10 | 32 | 54 | 1,5 |
PAW 52 P10 | 52 | 78 | 2,0 |
PAW 16 P10 | 16 | 30 | 1,5 |
PAW 10 P10 | 10 | 20 | 1,5 |
PAW 62 P10 | 62 | 90 | 2,0 |
VIIPLUS thrust washers and thrust bearings MADE TO ORDER From China. This means that they have many of the same properties as our cylindrical plain bearings, such as excellent wear resistance and low coefficients of friction. Thrust washers are designed to carry high axial loads and are used in applications where axial loads are expected. Polymer Coated Bearings high-performance polymeric coatings provide reduced friction and greater wear resistance.
Bearings, Bushings and Thrust Washers Made to Order From China
Special PTFE sliding layer covers two surfaces
Excellent impact resistance
High load capacity
Excellent deviation resistance
Excellent pollution resistance
Good surface speed capability
Excellent friction and abrasion resistance
Good resistance to chemical corrosion
Diesel
Gasoline (petrol)
Hybrid/electric vehicles
Sliding Bearings, Bushings and Washers
VIIPLUS CHINA thrust washer & bearing: double-sided filled PTFE tape liner on fiberglass core with excellent shock, misalignment, contamination resistance.Plain Thrust Bearing Washer inch size metal Bronze alloy high-temperature resistant thrust Gasket sf-1 oilless Washer custom self-lubricating composite bearing.
High precision
High speed
Low noise
Wear resistance
Woven Pfte Thrust Washer Self Lubrication Thrust Bearings Stainless Steel Backing GGB WC08DU
Metal-Backed
series thrust bearings offer an economical approach to obtaining self-lubrication where high loads are encountered. They are comprised of zinc-plated mild steel with woven PFTE laminated to one face. These bearings are recommended for use as an alternate to LTD washers in applications where metal backing is preferred.
The maximum compressive strength is 30,000 psi, with an operating temperature range of -320°F to 300°F. Friction coefficients as low as 0.03 with no added lubricants are obtainable.
Liners can also be supplied. For special applications, consult the Transport Dynamics Engineering Department. These thrust bearings can also be supplied with special metals and with liners on both sides.viiplus provides a complete set of sliding bearing solutions for hydraulic system users. The supplied products include gear pump aluminum seat assembly, axle sleeve, side plate; Blade pump and plunger pump with oil plate, return disk, axle sleeve; Cylinder liner, and so on.
All Size Customized Steel Composite Material Sliding Washer
Di (mm) | Do (mm) | ST (mm) | dD (mm) | dP (mm) | Ha max. (mm) | Ha min. (mm) | |
WC08DU | 10 | 20 | 1.5 | 1.2 | 0.95 | ||
WC10DU | 12 | 24 | 1.5 | 1.75 | 18 | 1.2 | 0.95 |
WC12DU | 14 | 26 | 1.5 | 2.25 | 20 | 1.2 | 0.95 |
WC14DU | 16 | 30 | 1.5 | 2.25 | 22 | 1.2 | 0.95 |
WC16DU | 18 | 32 | 1.5 | 2.25 | 25 | 1.2 | 0.95 |
WC18DU | 20 | 36 | 1.5 | 3.25 | 28 | 1.2 | 0.95 |
WC20DU | 22 | 38 | 1.5 | 3.25 | 30 | 1.2 | 0.95 |
WC22DU | 24 | 42 | 1.5 | 3.25 | 33 | 1.2 | 0.95 |
WC24DU | 26 | 44 | 1.5 | 3.25 | 35 | 1.2 | 0.95 |
WC25DU | 28 | 48 | 1.5 | 4.25 | 38 | 1.2 | 0.95 |
WC30DU | 32 | 54 | 1.5 | 4.25 | 43 | 1.2 | 0.95 |
WC35DU | 38 | 62 | 1.5 | 4.25 | 50 | 1.2 | 0.95 |
WC40DU | 42 | 66 | 1.5 | 4.25 | 54 | 1.2 | 0.95 |
WC45DU | 48 | 74 | 2 | 4.25 | 61 | 1.7 | 1.45 |
WC50DU | 52 | 78 | 2 | 4.25 | 65 | 1.7 | 1.45 |
WC60DU | 62 | 90 | 2 | 4.25 | 76 | 1.7 | 1.45 |
Product Name | Washer |
Max Load Capacity | Static load 250N/mm2 ; Dynamic load 140N/mm2 |
Max Load Speed | Dry friction 2.5m/s ; Oil lubrication 5.0m/s |
Max PV Value Limit | Dry friction 3.6N/mm2 m/s ; Oil lubrication 50N/mm2 m/s |
Friction Coefficient | Dry friction 0.08~0.20; Oil lubrication 0.02~0.07 |
Work Temperature | -195℃~+280℃ |
Thermal Conductivity | 42w/m k |
Production Process | Material cutting~Bronze sintering~PTFE sintering~Sizing~Coiling~Surface finish~Packing |
Application Feature | Self lubrication, Low wear, Low friction, Low noise, Good sliding characteristic, Pb free |
Metal-Polymer Low Friction Plain Bearings
Steel + Bronze Powder + PTFE/Fibre(DP4)
Self Lubricating Bearings Low-Carbon Steel + Porous Bronze + Red PTFE
VSB-40 low friction bushings offer good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions
· Very good performance in lubricated applications
· Good performance in greased applications
· Suitable for linear, oscillating and rotating movements
Suitable for dry running, low coefficient of friction, lower wear, good sliding characteristics, the transfer film created can protect the mating metal surfaces, suitable for rotating and oscillating movement, high chemical resistance, low absorption of water and swelling. The VSV-40 improved the friction and much good wear resistance over the common CSB-10 range under lubricated operation.
1. PTFE/Polymer fibers mixture thickness 0.01~0.03mm. The lead-free bearing layer provides an excellent initial transfer film, which effectively coats the mating surfaces of the bearing assembly, forming an oxide type solid lubricant film.
2. Sintered bronze powder thickness 0.20-0.35mm, provides max. thermal conductivity away from the bearing surface also serves as a reservoir for the PTFE mixture.
3. Steel backing, provides high load carrying capacity, excellent heat dissipation.
4. Copper/Tin plating thickness 0.002mm provides good corrosion resistance.
· Metal-Polymer Composite Bushing Material
· Steel Back + Porous Bronze Sinter +
· PTFE + Fillers
OPERATING PERFORMANCE | |
Dry | Good |
Oil-lubricated | Very Good |
Grease lubricated | Good |
Water lubricated | Fair |
Process fluid lubricated | Good |
Sliding layer |
Max. load | Static | 250N/mm2 | Max.speed | Dry running | 0.08~0.20 | |
Very low speed | 140N/mm2 | Hydrodynamicoperation | 0.02~0.08 | |||
Rotatingoscillating | 60N/mm2 | Friction coefficient | Dry | 2m/s |
| |
Hydrodynamic | >2m/s |
| ||||
Max. PVdryrunning) | Short-term operation | 3.6N/mm2*m/3 | Thermal conductivity | 42W(m*K)-1 |
| |
Continuousoperation | 1.8N/mm2*m/3 |
| ||||
PV max. hydrodynamic | -195℃~+280℃ | Coefficient of thermalexpansion | 11*10-6*K-1 |
|
Bearing forms available in standard dimensions
· Cylindrical bushes
· Flanged bushes
· Sliding plates
· Thrust washers
· Flanged washers
Metric bearings and imperial bushings made to order: Standard bushing forms in special sizes, half-bushings, stamped/deep drawn shapes, bearings with locating notches, lubricant holes and grooves, customized designs
START YOUR PROJECT WITH AN APPLICATION ENGINEER
DU Bushing, DU Bearing, Line Bearing, Ptfe Coated Bushing, DX Bush, DX Bearing, Self-Lubricating Bearing, Sliding Bearing, Bimetal Bush, Wrapped Bronze Bushing, Oiles Bush, Oiles Bearing, Cast Bronze Bearing, Oiles Wear Plate, Oiles Guide Rail, Pom Coated Bearing, Metal-Polymer Composite Bearing, Plain Bush, Supplier, Company bushing catalog | Bushings Catalog (Plain Bearings Catalog)